|"Project and server administration"|
Setting up the environment MULTI-USERBefore creating a multi-user project you must first install the articy:server and create one or more users. The following guide explains this setup step by step:
STEP 1: Choose a PC to run the server software
Choose a PC on which the articy:server shall run. This can be any PC in your office (the articy:server service just needs minimal system resources). Just make sure that all team members are able to connect to this machine and communicate the server address and port to all team members, so that they can log in with the articy:draft client.
STEP 2: Install the articy:server service
Install the ArticyServer.exe on the chosen machine.
Just follow the setup wizard step by step.
Register your articy:sever licence key. This key always starts with a 'B'. If you don't have the licence key at hand, you can also register it after the installation is finished (see STEP 5).
If you don't have an articy:draft client installed on this machine, make sure to also install the component 'Articy Server Management Client'. This is a reduced client that provides quick access to the server administration interface.
STEP 3: Connect to the server
Start articy:draft (Multi-User) or articy:draft (Server-Admin) and connect to the server by entering the address and port number:
STEP 4: Enter server administration mode
Go to the server administration mode by using the following default credentials:
User name = serveradmin
Password = ServerAdmin (capitalized 'S' and 'A')
STEP 5: Change server password
The first thing you should do after entering the server administration mode is to change the password. Click on the main menu in the upper left and choose "Change profile/password" 1. Of course you can always change the password later.
STEP 6: Register licence key
Register your articy:server licence key. In the server administration mode click on "Register" 1.
Enter the licence key that always starts with a 'B' 2.
After the key was validated you can see how many multi-user and viewer licences are available for your team 3.
STEP 7: Create users
Now that the server is installed and the licence key registered, you can create user profiles for all team members that shall work with articy:draft. Switch to the tab labeled "User" and click on "Create" 4:
Make sure to assign a viewer (read-only access) or a usual multi-user licence to every created user 5:
STEP 8: Leave server administration modeOpen the main menu and choose 'Leave administration mode'. The user login-screen re-apprears.
STEP 9: Login as regular userUse the username and password you just entered when creating the new articy:draft user. The project selector screen appears.
STEP 10: Create projectNow it is time to create your first multi-user project. For details see here.
If you have already installed the articy:draft demo projects, you will see them now.
For more details about the Multi-user environment, read here.